4B W400 Series User Manual

4B - W4005 BÜHLER ELEVATOR MONITORING SYSTEM R9.6 – 22 May 2020
Page 25 of 48
Warning: Contactor feedback voltage applied across pins 17 and 18 must be 24Vdc only! Voltage higher
than this will damage this circuit and should not be used!
Note: Please see section 7.3 - W4005NV46AI /B – W400 Series Elevator Controller for information on the
relays Voltage and Current ratings.
Note: Alarm/Fault and Stop relays are normally open relays, which will be in closed state under normal
machine running conditions.
Please contact 4B for additional wiring diagrams.

4B W400 Series Specifications

General

Brand	4B
Model	W400 Series
Category	Measuring Instruments
Language	English