4B - W4005 BÜHLER ELEVATOR MONITORING SYSTEM R9.6 – 22 May 2020
Page 7 of 48
Kirk Lane, Yeadon LS19 7LX,
United Kingdom
4.2 W4005V46-SYS2 /B Declaration of Conformity
DECLARATION
OF CONFORMITY
Note: This is an example of the declaration of conformity. The correct and signed version is included as an
insert within the printed manual together with the delivered product.
I, the undersigned, on behalf of Don Electronics Limited, hereby declare that the Assembly listed below
conforms to the relevant provisions of the 2014/34/EU ATEX (Atmosphères Explosibles) Directive and
2006/42/EC Machinery Directive and other normative documents mentioned herein.
ASSEMBLY: W4005V46-SYS2
TYPE OF PRODUCT: SENSOR MONITORING SYSTEM
INTENDED USE: ELEVATOR MONITORING
DIRECTIVE: DIRECTIVE: 2014/34/EU ATEX and 2006/42/EC Machinery (Article 12, 3 (a))
W4005V46-SYS2 SYSTEM
We declare that we have followed the ATEX Guidelines on the Application of 2014/34/EU concerning
equipment and protective systems intended for use in potentially explosive atmospheres (4
th
Edition). As per
section 3.7.5 (Assemblies) of the above guidelines, we declare that we have carried out an ignition risk
assessment of this system and state that this assembly has not altered the explosion characteristics of the
products with respect to the Essential Health & Safety requirements of the above Directive.
Name: David Wheat
Position: Managing Director
Date: 13
th
May 2020
Don Electronics Ltd
To Next Page
Loading...
Need help?
General
