4iiii precision pro - 7.4 Powermeter Not Found in 4 iiii App; 7.5 ANT+ Display Connectivity Issues; 9. Precision Pro Powermeter Warranty Information

7.4 Powermeter is
not shown while
attempting to pair
with the 4iiii App
• Spin the crank arms four times to wake your
powermeter
• Ensure the powermeter is paired with your Bluetooth
Smart display unit
• Ensure the Bluetooth option is enabled on your
Bluetooth Smart display unit
• Ensure the powermeter is not connected to another
Bluetooth Smart display unit
• Remove the battery from your powermeter, wait one
minute, and put the battery back into your powermeter
• Replace battery in your powermeter (see Section 2.3)
7.5 Powermeter
cannot connect to
ANT+ display unit
• Spin the crank arms four times to wake your
powermeter
• Ensure the powermeter is paired with your ANT+
display unit
• Remove the battery from your powermeter, wait one
minute, and put the battery back in your powermeter
• Replace battery in your powermeter
(see Section 2.3)
7
TROUBLESHOOTING
24
Table of Contents