1 4s3™ Introduction
The 4s3™ is a compact semi-automatic sheet heat sealer which is compatible with a wide range of seals and
plates of differing designs and heights. With variable temperature and time settings, sealing conditions are easily
optimised to produce a 100% tight seal, eliminating sample loss.
Plate and seal are placed on the holder, the "Operate" button is pressed and the drawer automatically closes. The
sealing process is controlled by an electric mechanism providing consistent plate sealing, eliminating variation
and giving reliable sealing every time.
When using the 4s3™ for the rst time, please read this entire operation manual carefully. To guarantee problem
free and safe operation, it is essential to observe the following information.
1.1 Unpacking (Packing / Contents Listing)
The device is delivered in an external carton and an internal carton with protective PE foam cushions. Remove the
4s3™ from each carton. All packaging should be retained until it has been established that the 4s3™ is working
properly.
Open the Semi-Automatic Heat Sealer package (4ti-0655) and conrm that all items are included:
• 4s3™ Device
• Power Cable
• Operation Manual and Quick User Guide
• 4s3™ Plate Support Adapter, Standard (4ti-0615)
If there are any items missing, damaged, or not according to your order, please contact your distributor or sales
representative immediately.
To Next Page
Loading...
