53
8. Fit the new arm cuff cover over the front vinyl
ring groove.
9. Reversing the steps used to remove, reattach the
rear and front frames, return the armrest to its
original position, then replace the armrest
securing screws (2) and front frame screw (1).
The arm cuff cover is consumable. New covers must be purchased separately.
(arm cuff cover
：
■
Using a correct arm cuff cover and exchanging it are important for safety and
measurement accuracy at this device.
12.5. Checking the number of measurements
The monitor can count the number of times blood pressure measurement has been
performed. This function is designed to check usage frequency and provide a
reference for scheduled cleaning. The count value is stored even after the power is
switched off.
To Next Page
Loading...
