Aastra 5361 - Undoing Actions; Resetting Activated Features

Using the display and operating elements
Aastra 5361/Aastra 5361ip 29
eud-1280/1.2 – R3.0 – 04.2013
Undoing actions
To cancel operating steps, proceed as follows:
Other navigation possibilities
Resetting activated features
You can deactivate again all the activated functions (e.g. Forwarding, Barring).
End input without saving:
Press the End key.
Back to the idle state in the menu:
Press the End key.
Scrolling back through the menu:
Press the Correction key.
Menu
Press the navigation key up.
➔All the activated functions are now displayed.
Or:
Retrievable also via menu: Menu > Activated features.
Reset
Reset the function in question.
➔The function is now deactivated.
c