Aastra 5361 - Page 93

Personalizing your phone
Aastra 5361/Aastra 5361ip 93
eud-1280/1.2 – R3.0 – 04.2013
Store a function under a key – function key
You want to retrieve a frequently used function - for example "call forwarding on no
reply" - using a single keystroke rather than having to enter it by hand. Usually the
function is assigned so that you:
• activate the function with the first keystroke,
• and deactivate the command again with a second keystroke.
Number key
Scroll to Number key and press the Select Foxkey.
Enter phone numbers and names and confirm with the Ok Foxkey.
Notes:
• The text mode for letter input is automatically activated.
• You can use the Correction key to delete any incorrect character.
Storing a function under a key (from a predefined selection of functions):
<long>
Storing a function under a configurable key/presence key:
Press the key and hold it down for a moment.
➔Display shows choice of key types.
Function key
Scroll to Function key and press the Select Foxkey.
➔The currently set function is displayed with .
<Function>
Select the function you want and press the Select Foxkey.
➔The further prompting depends on the function (see Chapter "Supplemen-
tary features", page 31). Once you have made all the settings, the function is
stored under the key.
Notes:
• The selection of functions can be found in the chapter "Function selection for
configurable key", page 95.
• In addition to the large number of predefined functions you can also write your
own function. For more information please refer to the chapter "Function com-
mands, function codes", page 98.