AastraLink RP System Administrator Guide 25
Using Administrator
Adding Phones
When you add a phone you must physically connect the device to the LAN and a
power source, as well as configure it using the Configure Phone Wizard.
To add a phone in Administrator, do the following.
1. Click the Phone System button.
2. In the Tasks pane, under Phones, click Add Phone. The Configure Phone wizard
opens.
3. Confirm that the phone is connected and plugged in, select the check box at the
bottom of the Have you connected your phone page, and click Next. The What
phone do you want to add page opens.
4. Click the phone you just connected.
To Next Page
Loading...
