Aastra 6755i - Introduction; Phone Features; Requirements

Aastra 6755i Quick Reference Guide
MX-ONE - Aastra 6755i
10
English
Authorization Code
Common Authorization Code
Dialing:
*72* Authorization
code
#
Press Dial and wait for verification
tone. Dial external number.
Canada; U.S.A: *6*...
Austria, Germany, The Netherlands: *75*...
Locking extension:
*73* Authorization
code
#Press Dial
Canada; U.S.A: *71*...
Unlocking extension:
#73* Authorization
code
#Press Dial
Individual Authorization Code
Dialing from own
extension:
*75* Authorization
code
# Press Dial and wait for
verification tone. Dial external
number.
Austria, Germany, The Netherlands: *72*...
Dialing from other
extension:
* 75 * Authorization code
* own extension number # Press
Dial and wait for verification tone.
Dial external number.
Austria, Germany, The Netherlands: *72*...
Locking extension:
*76* Authorization
code
#Press Dial
Unlocking extension:
#76* Authorization
code
#Press Dial
Shortcut Keys
There are two types of shortcuts: softkeys and
programmable keys (hard keys)
Do not program new softkey shortcut keys from the phone,
because this programming can interfere with the keys used
by the system. Use the Web Interface to program the softkey
shortcuts. A softkey shortcut programmed by the user
may be overwritten by the system if the administrator
later sets a new key there.
The only type of shortcut that a user normally shall
program is speed dial keys with a phone number or a
procedure.
Program a new
softkey shortcut from
the phone
Use the web interface
Program a new
progammable key
(hard key) from the
phone
Press the programmable key for a
couple of seconds
Enter the number. Press Save
Program a new
softkey shortcut from
the web interface
Operation > Softkeys and xml
Program keys with key number 9
and higher
Program a new
programmable key
from the web
interface
Operation > Programmable
keys
Edit a shortcut: Options List >
Preferences > Speed Dial Edit
Press the key to edit and then edit
name or number. Press Save
Delete shortcut: Options List >
Preferences > Speed Dial Edit
Press the key to delete and select
Remove