When in an idle state, pressing the Menu key <M> of the
handset presents the following list of options. Once in the menu
list, the user can scroll up <F> and down <M> using the scrolling
keys to see each option.
Note: The display returns to idle if no action/activity is
initiated within 20 seconds.
Pressing the key quits the Menu and returns to the
idle mode or call mode.
1: Intercom - Pressing Select while viewing this option
allows an intercom call to the base phone by then
pressing Call. Press Icom on Base to call handset.
2: Language - change display language
3: Ring Tone - Select to change Ring Tone
4: Custom Name - Personalize the name of the handset
5: Call Timer - Enable or disable to time length of call
6: Vibrate - Enable or disable vibration on incoming calls.
Does not vibrate during intercom
7: Handset pairing - See “Pairing and Unpairing”
instructions
8: Key Lock Off/On - Select to lock the keypad to avoid
accidental calls. Can also be activated by pressing <M>
key then * when idle.
9: Backlight On - Select to turn the backlight on or off
10: Silent Alert On/Off - Select to activate vibrate and
turn off ring tone. When activated, the ringer icon (bell)
does not show up on the display.
To Next Page
