Supplementary features
26
eud-0830/2.0 — I7.6 — 08.2007
n
Call Waiting on an Internal Subscriber
You want to talk to an internal subscriber. However, the person is busy.
As a result of your call waiting, the person hears a call waiting tone and your phone number or
name appears on his display. The person can either answer or reject your call.
Requirement: It is essential that the internal subscriber has not barred the Call waiting function
on his phone (for configuration see the Chapter "Do not disturb/Call waiting/Intrusion/
Announcement/Forward", page 58).
Ask your system administrator whether the Call waiting function is enabled on the system.
n
Answering Call Waiting
You are in a call and hear the call waiting tone. Someone is urgently trying to reach you.
You can either answer, deflect or reject the call.
Delete
Clear callback [a]:
Press the Delete Foxkey.
Þ
Callback is deleted.
Note:
You can deactivate a requested callback using Menu > Activated features >
Reset Foxkey.
Call waiting
Subscriber is busy:
Press the Call waiting Foxkey.
Þ
You hear the dialling tone.
Note:
If the person rejects your call request or if call waiting is not possible, the call is
disconnected (busy tone).
Answer
Answering the call:
Press the Answer Foxkey.
Þ
1. Your original call partner is put on hold. You are now connected with the
party who initiated the call waiting.
Note:
For more detailed information on how to broker between callers or set up a
conference, please refer to the Chapters "Brokering between an Enquiry Call
Party and Your Call Partner", page 29 and "Making a Conference Call", page 30
respectively.
<Phone number>
Deflect call:
Enter the subscriber phone number and confirm with the Ok Foxkey.
Þ
Call-waiting party is put through.
Note:
You can also search in the phone book, last-number redial list or call list for the
phone number of the person you are looking for.
eud-0830_en.book Page 26 Monday, August 13, 2007 3:01 PM
To Next Page
Loading...
