Installation and First-Time Operation
79
eud-0830/2.0 — I7.6 — 08.2007
n
Dismantling
Desktop phone:
• Disconnect the phone cord and remove.
• Carefully pull the stand rest away in the opposite direction.
Wall set:
• Carefully slide the phone upwards out of the stand rest.
• Disconnect the phone cord and remove.
Connecting the Office 70
n
Connections
n
Connecting your phone to the system
• Plug the connector on the phone cord on the underside of the phone into the socket with
the phone symbol.
• Desktop installation only: To relieve the strain on the cable feed the cable through one of the
cable guides on the stand rest.
• Plug the other end of the cable into the phone socket outlet.
• Set channel selector switch on the underside of the phone. Contact your system administra-
tor for more information.
n
Logging your phone on
Your system administrator has to prepare the system before you can log on your phone.
Telephone connection
Connecting the handset
Connecting the headset
Connecting the Office KBM⁄DKBM expansion key module or power supply
eud-0830_en.book Page 79 Monday, August 13, 2007 3:01 PM
To Next Page
Loading...
