Personalizing Your Phone
56
eud-0830/2.0 — I7.6 — 08.2007
n
Changing the PIN
You want to change the PIN used to lock/unlock your phone (see Chapter "Locking Your
Phone", page 36 and "Unlocking your phone", page 37).
The factory setting is digit combination "0000"; you can select any 2 to 10-digit combination for
your new PIN.
If you have forgotten your PIN, your system administrator can reset it to the factory setting.
Menu
Press the Menu Foxkey.
Settings
Scroll to Settings and press the Select Foxkey.
General
Scroll to General and press the Select Foxkey.
PIN
Scroll to PIN and press the Modify Foxkey.
Þ
The display reads Old PIN.
<PIN>
Enter the old PIN and confirm with the Ok Foxkey.
Þ
The display reads New PIN.
<PIN>
Enter the new PIN and confirm with the Ok Foxkey.
Þ
The display reads Confirm.
<PIN>
Enter the new PIN a second time and confirm with the Ok Foxkey.
Þ
The new PIN is stored.
Notes:
• For each digit entered, the display shows an "*".
• You can also change the PIN with */# procedure *47 (see "User’s Guide */#
Procedures as of I7.1").
eud-0830_en.book Page 56 Monday, August 13, 2007 3:01 PM
To Next Page
Loading...
