Supplementary features
40
eud-0830/2.0 — I7.6 — 08.2007
n
Send text messages
You want to send a written message to an internal subscriber.
You can send a text message to an internal subscriber. The text message will appear on the per-
son's display.
Requirement: The internal subscriber must have a phone capable of receiving messages.
You can use one of the text messages stored in the system directly, modify it or create a new
message.
Menu
Press the Menu Foxkey.
Text message
Scroll to Text message and press the Select Foxkey.
New
Scroll to New and press Select Foxkey.
<Message>
Select one of the text messages stored in the system and press Select Foxkey.
<Text>
Adapt or expand the text and press the Send Foxkey.
<Destination>
Select the destination and press the Select Foxkey.
<Phone number>
For subscriber and group: Enter the call number and press the Send Foxkey.
Þ
The message is sent.
Note:
If the display reads Not available, the message could not be sent.
eud-0830_en.book Page 40 Monday, August 13, 2007 3:01 PM
To Next Page
Loading...
