Supplementary features
31
eud-0830/2.0 — I7.6 — 08.2007
n
Parking a Call Partner
You want to put your call partner on hold without using a phone channel as a result.
You can park your call partner locally. A locally parked call partner can only be retrieved by the
phone from which the function was initially carried out. You can also allocate the Park function
to a freely configurable key (see Chapter "Configuring Keys", page 61).
Connecting without notification:
Wait for the first ringing tone, then hang up.
Þ
The other party is then called directly by your first call partner.
Note:
Recall: If the other party does not answer, the call comes back to your phone.
Park
Press the Park Foxkey.
Þ
Your call partner is now parked locally; is displayed.
Put the handset on-hook.
[P]
To retrieve a parked call party:
Press the [P] Foxkey.
Þ
Connected in hands-free mode.
To phone with the handset:
Pick up the handset.
Notes:
• With the Foxkey End the display returns to the idle state. As long as your call
partner does not hang up, he remains parked. Via Menu > Activated features
> Foxkey [P] you can retrieve your parked call party.
• The */# procedure for central parking can be found in the "User’s Guide */#
Procedures as of I7.1".
eud-0830_en.book Page 31 Monday, August 13, 2007 3:01 PM
To Next Page
Loading...
