Supplementary features
43
eud-0830/2.0 — I7.6 — 08.2007
n
Paging an Internal Subscriber
You are unable to reach an internal subscriber and thus want to page them.
If the system is equipped with a paging system (PS), the person can be paged. The paged per-
son can answer from any phone.
Enter #36.
Enter your internal phone number.
Enter your PIN.
Enter the internal or external phone number with the exchange access digit.
Pick up the handset.
Þ
The phone number displayed is dialled.
Note:
When you hang up, dialling by name and your private phone book remain
available for a whole minute so you can make another call.
Or:
• Enter #46 for a private call.
• Enter your internal phone number.
• Enter your PIN.
• Enter the external call number directly, without the exchange access digit.
• Pick up the handset.
Þ
The phone is now enabled; the external subscriber is called.
Note:
The factory setting "0000" is not accepted. First change the PIN (see Chapter
"Changing the PIN", page 56) or using the */# procedure *47 (see “User’s Guide
*/# Procedures as of I7.1”). If you have forgotten your PIN, your system admin-
istrator can reset it to the factory setting.
Menu
Press the Menu Foxkey.
Call features
Scroll to Call features and press the Select Foxkey.
Page
Scroll to Seach and confirm Ok with the Foxkey.
<Phone number>
Enter the phone number f the person to be paged and confirm with the Ok
Foxkey.
Þ
The person is paged and sees your phone number on the pager.
eud-0830_en.book Page 43 Monday, August 13, 2007 3:01 PM
To Next Page
Loading...
