Personalizing Your Phone
67
eud-0830/2.0 — I7.6 — 08.2007
<long>
Press the Line key you want and hold it down for a moment.
Þ
The display shows the line key and the properties with which you can con-
figure the line key.
Note:
The Personal key is also treated as a line key.
<Audio setting>
Scroll to the required audio settings and press the Modify Foxkey.
<Setting value>
Select the required setting and confirm with the Ok Foxkey.
Þ
The setting is stored.
Note:
• Setting possibilities for ringing: Off for no ringing tone, On for instant ringing
tone, and ringing tone Del 10s, Del 20s and Del 30s and confirm Ok with the
Foxkey.
• You can listen to each setting using the Test Foxkey.
Answer
Setting the answering mode:
Scroll to Answer and press the Modify Foxkey.
<Setting value>
Change the settings used to answer a call: Key to answer the call by pressing
the line key, Handset to answer by picking up the handset, and Hands-free to
answer automatically with hands-free, and confirm with the Ok Foxkey.
Þ
The setting is stored.
Notes:
• The Handset and Hands-free settings only work when the ringing signal is
activated.
• If you select answer using Handset or Hands-free, you must also specify the
Priority, with 1 being the highest priority, and 8 the lowest:
Priority
Setting the priority:
Select the priority you want from 1 to 8 and confirm with the Ok Foxkey.
Þ
The setting is stored.
eud-0830_en.book Page 67 Monday, August 13, 2007 3:01 PM
To Next Page
Loading...
