Aastra OpenCom 100 series Quick Reference Guide

Forwarding Calls
20
On busy
On:
H*674* Z (user’s internal tel. no.) *Z (destination no.) #
Off:
H#674* Z (user’s internal tel. no.) #
If the terminal of the user is busy, then calls will immediately be forwarded to the
other terminal.
After delay
On:
H*614* Z (user’s internal tel. no.) *Z (destination no.) #
Off:
H#614* Z (user’s internal tel. no.) #
Calls are signalled on the users terminal and after the specified time set in the
OpenCom 100 are forwarded to the other terminal.
6.5 MSN Call Forwarding
Using “MSN Call Forwarding”, you can forward both a single MSN and several MSNs
together to an external number. The individual MSNs are separated using
*.
You do not need to enter the full MSNs – the last unique digits are all you need, as
this is sufficient to distinguish them from one another.
Example:
“Immediately MSN” for several MSNs
Let’s say you want to forward the MSNs 86013, 86014 and 86554 to the destination
number 861234. To do this, enter the following:
H*213*
3
(for the MSN 86013) *
14
(for the MSN 86014) *
54
(for the MSN 86554) *
861234
(the destination no.) #
Immediately (for one MSN)
On:
H*213* Z (MSN) *Z (destination no.) #
Off:
H#213* Z (MSN) #
Immediately (for several MSNs)
On:
H*213* Z (MSN 1) *Z (MSN 2) *Z(destination no.) #
Off:H#213* Z (MSN 1) *Z (MSN 2) #

Aastra OpenCom 100 series Specifications

General

Brand	Aastra
Model	OpenCom 100 series
Category	PBX
Language	English