Forwarding Calls
22
own telephone (see page 29). Calls are forwarded to the telephone (destination)
on which you carry out the procedure.
Initiating the function on the destination telephone
H*22* Z (source PIN) *Z(source tel. no.) #
Calls are immediately forwarded to the other destination, and are not signalled on
your own telephone. On the originally dialled telephone (the source) you will hear
a special dialling tone on lifting the handset.
Switching the function off on your own telephone
H#21#
(= call forwarding off)
Use this procedure to deactivate the function on your own telephone.
Switching the function off on another telephone
H#22* Z (source PIN) *Z(source tel. no.) #
(= call forwarding off).
You can use this procedure to switch off the call forwarding for your telephone
from any other telephone.
6.8 Call Forwarding for Specific Call Numbers
Besides the call forwarding that you can program at your telephone, the system
administrator can program call forwarding where the call number of the caller is
analysed (“SCF: Selective Call Forwarding”). Potentially this could be the reason
why specific calls do not reach you. If you have any questions concerning this func-
tionality, please consult your system administrator.
To Next Page
Loading...
Need help?
General
