Aastra OpenCom 100 series Quick Reference Guide

Forwarding Calls
21
An external call for an MSN configured in the OpenCom 100 is forwarded immedi-
ately to the specified external destination and not signalled on the original ter-
minal. If “Immediately MSN Call Forwarding” is activated on your telephone, you
will hear a special dial tone when you pick up the handset.
On busy (for one MSN)
On:
H*673* Z(MSN)*Z (destination no.) #
Off: H#673* Z(MSN) #
On busy (for several MSNs)
On:
H*673* Z (MSN 1) *Z (MSN 2) *Z(destination no.) #
Off:H#673* Z (MSN 1) *Z (MSN 2) #
When a terminal is busy, an external call for an MSN configured in the
OpenCom 100 is forwarded immediately to the specified external destination.
After delay (for one MSN)
On:
H*613* Z (MSN) *Z(destination no.) #
Off:
H#613* Z (MSN) #
After delay (for several MSNs)
On:
H*613* Z (MSN 1) *Z (MSN 2) *Z(destination no.) #
Off:H#613* Z (MSN 1) *Z (MSN 2) #
An external call for an MSN configured in the OpenCom 100 is signalled on the
destination terminal and forwarded to the specified external destination after the
specified time set in the OpenCom 100.
6.6 All Call Forwarding Off
H#2#
If you have programmed several instances of call forwarding, you can deactivate
them all simultaneously with the above procedure.
6.7 Follow Me
You can activate and deactivate immediate internal call forwarding for your own
telephone from any other telephone, providing you have the user PIN for your

Aastra OpenCom 100 series Specifications

General

Brand	Aastra
Model	OpenCom 100 series
Category	PBX
Language	English