Aastra OpenCom 100 series Quick Reference Guide

Special Modes
31
Selectively calling via routes allows you to reach parties in the branch offices of a
large corporate network, for example. By manually entering a routing code, you
can also administer the tariff charge data for private and professional calls sepa-
rately.
Your system administrator will inform you of the current routes and their
routing codes.
9.3 Time Control
Several time groups can be configured in the OpenCom 100. Depending on the
activated time group, incoming calls are signalled on different terminals. It is pos-
sible to automatically change between these time groups, according to a time-
table set up by the system administrator, or to change them manually.
You can only program this function if the system administrator has activated the
“Time control” authorisation for your user group.
This feature cannot be used with a SIP terminal.
Activating automatic time control
H*8#
This key combination activates automatic time control. The setting remains
unchanged until one of the available time groups is set manually.
Manually setting a time group
H*8* Z (number of the time group, e.g. 1) #
You activate the required time group using this procedure; automatic time control
is then deactivated. Ask your system administrator about the number of con-
figured time groups.
This feature cannot be used with a SIP terminal.

Aastra OpenCom 100 series Specifications

General

Brand	Aastra
Model	OpenCom 100 series
Category	PBX
Language	English