Features and MenuCards Main Menu
104
MPSelect
2ƒCall forwarding
, followed by …
1ƒDivert phone
: Select
Immediately
,
After delay
or
Busy
to specify the
type of forwarding and press
O. Then key in the
Dest.
of the call forwarding
as follows:
■ For external call numbers, you can enter the number directly if line seizure is
automatic. If line seizure is manual, enter the call number after keying in the
line seizure code digit (the default setting is
0)
■ For internal call numbers, enter the number directly if line seizure is manual. If
line seizure is automatic, enter the call number after pressing the star key twice
**.
Then select whether
Internal calls
,
External calls
or
Int./ext.
calls
are to be forwarded to the destination (
Dest.
). If you assign the “Divert
phone” function to a feature key (see also Programming Functions (Features)
starting on page 123), you can also enter a
Text
for a label for the key. The label is
displayed in the OpenCom 100’s Configurator for informational purposes.
Activate call forwarding with
On
. Activated call forwarding (
Immediately
,
After Delay
,
Busy
) is indicated by a “+” sign followed by the call forwarding
destination. You can switch call forwarding on or off using the plus/minus
key
=.
2ƒDivert key
: This function is only available in the menu if more than one trunk
key is configured on your telephone. In this case, you can configure call forwarding
for each trunk key individually. Select the key to which the internal call number is
assigned and which you want to forward from the list. The procedure is otherwise
the same as that for configuring the “Divert phone” function (see the previous
section).
3ƒDivertƒMSN
: Select the MSN (one of the call numbers supplied for the multi-
terminal access) that you want to forward. Several MSNs can be grouped together
(this is configured by your system administrator) and forwarded to a common des-
tination number. Selecting the
All
menu itemlets you forward all configured
MSNs to the same destination number.
You need the relevant authorisation to forward MSN groups and all MSNs. Only
then will the corresponding items appear in the menu. Contact your system
administrator if you have any questions about your authorisation and the current
configuration of MSN groups.
To Next Page
Loading...
