Remote-controlled Functions Remote-Controlled Dialling (Call Through)
94
5. Remote-controlled Functions
The OpenCom 100 enables remote-controlled calls and remote-programmable
call forwardings. These features are set up by the administrator when configuring
the system. The system PIN is required to carry out these features.
The system PIN is issued by the system administrator, and it must be changed from
the factory setting (“0000”) to another value for the features described below to
function.
All the owners of voiceboxes can also call their voiceboxes from external tele-
phones if they are authorised to do so. They can remotely access and edit their
messages as well as modify the central settings of their voiceboxes.
5.1 Remote-Controlled Dialling (Call Through)
Without Internal Number Assignment
With Internal Number Assignment
Z Enter the reserved call number.
Z Enter the system PIN.
* Press the star key.
Z Enter the trunk line seizure code, e. g. 0.
Z Enter the external call number.
# Press the hash key.
Z Enter the reserved call number.
Z Enter the system PIN.
* Press the star key.
Z Enter the trunk line seizure code, e. g. 0.
Z Enter the external call number.
* Press the star key.
To Next Page
Loading...
