Features and MenuCards Main Menu
115
■
6ƒIntercept
: The numbers of malicious callers can be saved in the network
operator’s exchange (if they offer this service). The function can also be used
also if the caller has already hung up!
■
7ƒReject
: This rejects the call (this can also be an announcement), and the
caller hears the busy tone.
■
8ƒDeflect call
: You do not accept the call. You specify the call number of
another subscriber with
Destination
, and forward the call there after
pressing
O. You can only use the “Deflect call” function if your user group
is authorised to forward calls to internal and/or external destinations.
■
9ƒPark call
: You can “park” one or more callers while you make other calls
(see MenuCard “Conversation” starting on page 59).
5ƒISP connection
: You can, with the requisite user group authorisation, con-
figure your system telephone to display and edit connections to the Internet
established via the OpenCom 100. To do this, first assign the
ISP connection
function to a feature key. The key’s LED will light up and remain illuminated for the
duration of the Internet connection.
■
1ƒDisconnect
: This disconnects the OpenCom 100’s current connection to
the Internet, disconnecting all active users from the Internet simultaneously.
■
2ƒAllowed
: This allows Internet connections to be made using
OpenCom 100. Activate this function by pressing
O.
■
3ƒProhibited
: This prohibits Internet connections from being made using
OpenCom 100. Activate this function by pressing
O.
6.2.8 MenuCard “Phone Book”
In this menu card you can add, edit and delete entries in your personal telephone
book. If your system administrator has assigned you (or the user group you belong
to) the necessary authorisation, you can also edit the central telephone book and
your company telephone book.
You will find more information about company telephone books in the “Instal-
lation and Commissioning” guide in the chapter entitled “Multi-Company Variant”
and in OpenCom 100’s online help.
To Next Page
Loading...
