Telephoning Making External/Internal Calls
55
2.3 Making External/Internal Calls
2.3.1 Manual or Automatic Line Seizure
If your telephone is set to manual line seizure, all call keys on your telephone first
seize an internal line, and you can dial an internal number straight away. When
making external calls, you must first press the line seizure code digit
(presetting:
0).
Note: This also applies to all enquiry calls and call forward-
ing to external destinations, but not to call forwarding
“MSN”.
Your system administrator configures this code digit for all subscribers on the
OpenCom 100 system and will tell you what value is currently valid.
If your telephone is set to automatic line seizure, all call keys on your telephone
seize an external line, and you can dial external numbers straight away. In order to
reach internal subscribers, press the star key twice
** before dialling the
internal number.
For the System Administrator:
The code digit is defined in the Configurator, menu PBX Configuration: Trunks:
Route (Setting for the External trunk route).
2.3.2 Making an External Call
With Automatic Line Seizure
H Lift the handset (your call key is seized).
and/or
g Press the particular call key (hands-free mode).
and/or
K Press the headset key (headset operation requires that the
headset is switched on, see page 109).
Z Dial the external call number.
To Next Page
Loading...
