AAXA Technologies SLC450 - Troubleshooting: Power and Files; Power-On and Picture Issues; File Support and Codec Issues

39
Technical Details
THE PROJECTOR DOES NOT TURN ON
Possible Causes Solution
There is no power. Check to ensure the power outlet source is good.
Check the power adapter to ensure a proper con-
.rotcejorp eht sa llew sa teltuo llaw eht htiw noitcen
Cannot power on the projector from the remote
control.
NO PICTURE / FILE NOT SUPPORTED
Possible Causes Solution
The video source is not properly connected or
selected
Check the video source signal to ensure that it
is properly connected. Select the current input
source by choosing the input desired from the
main menu
incorrect codec
Troubleshooting
To power on the projector , Press the switch on
the back of the projector. Next , if the projector is
not powered on , press the Power button on the
remote control.