Abaxis i-STAT Alinity v - NCi General Configuration

i-STAT Alinity v — User Manual 650-7100 Rev. A60
AlinIQ NCi - General Section
On the first section of the NCi screen, specify whether this NC file will be used
for multiple i-STAT Alinity v Analyzers or a single analyzer. Unless your facility
requires that each analyzer have its own unique security credentials, a single NC
file may be used for all analyzers connecting to the same network.
Numbered labels ( ) are used in this section to highlight areas of the screen.
These labels are for the purpose of this document only. They are not part of the
actual NCi screen.
The conguration will be used for:
Select one of these radio buttons:
Multiple analyzers
Use this NC file for multiple analyzers. This is the default.
This option may not be available if your facility requires individual
Enterprise Security Certicates for each analyzer.
Instrument
This NC file will apply only to one analyzer. If this option is selected,
the analyzer’s serial number is required:
SNSerial
number of the analyzer to which this NC file applies. When a serial
number is specified, the NC file name will include it, as shown here:
 DefaultCong.snnnnn.ancc
Conguration Name
Name for the NC file. Specify up to 53 alphanumeric characters.
NC File Name
This field is automatically populated with the NC file name and cannot be
changed.
Connectivity (Continued)
1A
1B
1C
1D
1E