Abaxis i-STAT Alinity v - Options for Enterprise Authentication Types

i-STAT Alinity v — User Manual 650-7100 Rev. A65
I want to set the Wi-Fi Frequency Bands manually.
Select this check box to configure the analyzer to use either the 2.4 or
5 GHz frequency band exclusively. When both values are selected, the
analyzer will automatically select which band to use. Select one of the
check boxes to limit the analyzer to that band only:
2.4 GHz
5 GHz
Options for Enterprise Authentication Types
When Authentication Type selected is WPA Enterprise, WPA2 Enterprise, or
WPA2/WPA Enterprise, the options shown here are enabled:
EAP Method
Select one of the following:
TLS
TTLS/MSCHAPv2
PEAPv0/EAP-MSCHAPv2
Validate the Server Certicate
Select this check box to configure the analyzer to validate the server certificate.
Unselect the check box if this is not required.
Server Name
Network name of the authentication server.
CA Certicate File
Name of the file that contains the Certificate Authority certificate.
Client Certicate File
Name of the file that contains the client certificate.
Client Key File
Name of the file that contains the client key.
Client Key Password
Password for the client key.
Username/Identity
Username required by the authentication server.
Connectivity (Continued)
3M