Abaxis i-STAT Alinity v - Copying NC File to USB Memory Stick

i-STAT Alinity v — User Manual 650-7100 Rev. A68
Connectivity (Continued)
AlinIQ NCi - Save the Network Connectivity (ancc) file
After supplying the information for connectivity, you are prompted to save the
ancc file. The saved file can then be loaded onto a USB memory stick, and then
uploaded to an i-STAT Alinity v Analyzer.
At the bottom of the NCi screen, choose Save Network Connectivity (ancc) File,
then click Continue.
Depending upon the browser in use the ancc file will be saved to the Downloads
directory, or, at the bottom of the screen a banner may display with the prompts
shown below.
Note: Best practice is to select Save which will save the le to the Downloads directory.
Opening NC (ancc) les in a text editor is not recommended.
Do you want to open or save lename.ancc?
Open
Open the ancc file in a text editor.
Save
Save the file to the Downloads directory.
Save as
Save the file to a specified destination.
Note: If you use this option make note of the destination where the le is saved.
This information will be needed to load the ancc le onto the USB memory stick.
Save and open
Not recommended.
Cancel
Do not save the file.