How to troubleshoot Abaxis VetScan SA Measuring Instruments when the SA analyzer power and Green Light on SA Power Switch is OFF?
If the SA analyzer power is off and the green light on the power switch is off: * Turn on the SA power switch. * Check that the SA analyzer power cord is firmly connected and plugged into a grounded power outlet. * Confirm the power outlet is working by plugging in another device. * Try another SA power cord.
What to do if the Abaxis Measuring Instruments printer has an error?
If the printer is showing an error, consider these steps: * Ensure the printer power LED is on; if not, power it on. * Select the printer in Settings > Options. * Check the printer power cord connection and the power outlet. * Confirm the power outlet is working by plugging in another device. * Replace the power cord if necessary. * Check the USB printer cable connections. * Replace the USB printer cable if necessary. * Correct any printer pop-up errors (e.g., paper out, ink out). * Refer to the printer user manual for details on flashing LEDs.
How to resolve mouse error on Abaxis VetScan SA Measuring Instruments?
To resolve a mouse error: * If the mouse is inverted and the red LED is illuminated, use a suitable mouse pad or surface. * Replace the mouse. * Reconnect the mouse cable.
How to fix keyboard error on Abaxis Measuring Instruments?
To fix a keyboard error: * Reconnect the keyboard cable. * Replace the keyboard.
What to do if there is no display and the Display LED light is ON for Abaxis VetScan SA?
If the display LED light is on but there's no display, check the following: * Ensure the SA analyzer power switch is on and lit green. * Verify the SA analyzer fan is running; if not, power cycle the SA analyzer. * Check and reconnect the Display VGA cable to both the SA analyzer and the Display. * Try connecting another Display.
What to do if there is no display and the Display LED light is OFF for Abaxis VetScan SA?
If there's no display and the display LED light is off, try these steps: * Turn on the display power button. * Check the display power cord is firmly connected and plugged into a grounded power outlet. Try another power outlet. * Confirm the power outlet by plugging in another device. Try another power outlet. * Try another display power cord.
Why is the Abaxis Measuring Instruments UA analyzer not connecting to SA?
The UA analyzer might not be connecting to the SA due to several reasons: * Ensure the UA analyzer is powered on. * Verify the UA is plugged into the back of the SA using the Y cable. * Try another Y cable. * Try plugging the Y cable into another SA USB port. * Verify settings by selecting VETSCAN UA after clicking Options button under Tools menu.
What to do if the Abaxis Measuring Instruments SA analyzer power and Green Light on SA Power Switch is ON?
If the SA analyzer power and green light are on, but the system isn't functioning, check the following: * Check if the fan of the SA analyzer is running. If it's off, power the SA analyzer off for 30 seconds and then switch it back on. * Contact Abaxis representative.
What to do if the Abaxis VetScan SA Measuring Instruments UA results are not transferring over to SA?
If UA results aren't transferring to the SA: * If the UA analyzer was operated independently, locate the UA test report on the UA database and transmit the data by pushing the “USB Send” icon. Start the next test process on the SA. * Reconnect the UA to the SA using the Y cable.
Why is the Abaxis VetScan SA sample not picked up by the sample probe?
If the sample is not being picked up by the sample probe: * Re-run the sample. * Run Cleaner.
States the manual is for veterinary use and outlines usage restrictions and warranty information.
Details quantitative measurement parameters, their display values, ranges, and units for urine sediment analysis.
Describes semi-quantitative measurement parameters, display symbols, and their corresponding concentration levels.
Lists potential warnings displayed for test results and the recommended actions to take.
Identifies and labels components on the front of the VETSCAN SA analyzer.
Identifies and labels components on the rear of the VETSCAN SA analyzer.
Identifies and labels components on the side panels of the VETSCAN SA analyzer.
Details the various ports available on the input/output panel for connectivity.
Identifies the specific ports used for connecting reagent tubes to the analyzer.
Guides the user through the test running process with images and text instructions.
Displays images captured at the end of the sample analysis for review.
The area where users input all necessary sample-related information.
Presents the classification of particles from the captured SA images.
Displays the results received from the connected UA analyzer.
Details various methods for collecting urine samples for analysis.
Provides instructions for proper handling and storage of urine samples before testing.
Step-by-step guide for performing a combined SA and UA test.
Step-by-step guide for performing the UA part of a combined test.
Shows how SA results are displayed by parameter, value, and unit, including warnings.
Displays UA results classified into semi-quantitative bins.
Instructions for replacing the SA Reagent Kit and related alerts.
Describes how to empty the waste container and associated alerts.
For setting up printer, clinic info, and UA connection settings.
Displays software versions and serial number of the analyzer.
Guidelines for installing the VETSCAN SA analyzer unit correctly.
Instructions for installing the SA reagent kit and making necessary connections.
How to connect peripherals like monitor, keyboard, and mouse to the analyzer.
Explains the purpose of safety labels and their meanings for user safety.
Lists safety standards the analyzer complies with, such as IEC 61010.
Lists EMC standards and FCC compliance information for the analyzer.
Details FCC compliance, warnings, and notes regarding operation.
Provides guidance on proper disposal of waste from the analyzer.
Technique to remedy errors related to Rinse A/B or loose connections.
Procedure to clear debris or bubbles from the measurement chamber.
Procedure used for preparing the analyzer for shipping or moving.
General| Brand | Abaxis |
|---|---|
| Model | VetScan SA |
| Category | Measuring Instruments |
| Language | English |
To Next Page
