What causes fuzzy or blurry images on Abaxis Measuring Instruments?
Fuzzy or blurry images can be caused by: * Thermal conditions that have changed. * Bubbles in reagents (indicated by black lines in images). * The chamber needing cleaning.
What causes the Abaxis VetScan SA UA analyzer power to fail?
The UA analyzer power may fail due to: * The UA analyzer not being powered on. * The SA analyzer not being powered on. * The UA not being plugged into the back of the SA. * A damaged UA Y cable cord. * A damaged SA USB port. To resolve this: * Turn on the UA. * Turn on the SA power switch. * Plug the UA-connected Y cable into the USB port on the back of the SA analyzer. * Try another Y cable. * Try plugging the Y cable into another SA USB port.
How to resolve bacteria showing up in all samples with Abaxis Measuring Instruments?
To address bacteria appearing in all samples: * Run a Cleaner cycle. * Run a Rinse B cycle.
States the manual is for veterinary use and outlines usage restrictions and warranty information.
Details quantitative measurement parameters, their display values, ranges, and units for urine sediment analysis.
Describes semi-quantitative measurement parameters, display symbols, and their corresponding concentration levels.
Lists potential warnings displayed for test results and the recommended actions to take.
Identifies and labels components on the front of the VETSCAN SA analyzer.
Identifies and labels components on the rear of the VETSCAN SA analyzer.
Identifies and labels components on the side panels of the VETSCAN SA analyzer.
Details the various ports available on the input/output panel for connectivity.
Identifies the specific ports used for connecting reagent tubes to the analyzer.
Guides the user through the test running process with images and text instructions.
Displays images captured at the end of the sample analysis for review.
The area where users input all necessary sample-related information.
Presents the classification of particles from the captured SA images.
Displays the results received from the connected UA analyzer.
Details various methods for collecting urine samples for analysis.
Provides instructions for proper handling and storage of urine samples before testing.
Step-by-step guide for performing a combined SA and UA test.
Step-by-step guide for performing the UA part of a combined test.
Shows how SA results are displayed by parameter, value, and unit, including warnings.
Displays UA results classified into semi-quantitative bins.
Instructions for replacing the SA Reagent Kit and related alerts.
Describes how to empty the waste container and associated alerts.
For setting up printer, clinic info, and UA connection settings.
Displays software versions and serial number of the analyzer.
Guidelines for installing the VETSCAN SA analyzer unit correctly.
Instructions for installing the SA reagent kit and making necessary connections.
How to connect peripherals like monitor, keyboard, and mouse to the analyzer.
Explains the purpose of safety labels and their meanings for user safety.
Lists safety standards the analyzer complies with, such as IEC 61010.
Lists EMC standards and FCC compliance information for the analyzer.
Details FCC compliance, warnings, and notes regarding operation.
Provides guidance on proper disposal of waste from the analyzer.
Technique to remedy errors related to Rinse A/B or loose connections.
Procedure to clear debris or bubbles from the measurement chamber.
Procedure used for preparing the analyzer for shipping or moving.
General| Brand | Abaxis |
|---|---|
| Model | VetScan SA |
| Category | Measuring Instruments |
| Language | English |
To Next Page
