AI1 = SLOT 1 --- AI2 =SLOT 2 --- AI3 = SLOT 3
n = 16
Idx Parameter Data Type Size Storage Class Range Note
n+0 BLOCK_OBJECT R R DS_32 20 Cst
n+1 ST_REV R S U16 2 N
n+2 TAG_DESC RW S O_STR 32 S
n+3 STRATEGY RW S U16 2 S
n+4 ALERT_KEY RW S U8 1 S
n+5 TARGET_MODE RW S U8 1 S AUTO-MAN-OOS
n+6 MODE_BLK R R DS_37 3 D
n+7 ALARM_SUM R R DS_42 8 D
n+8 BATCH RW R DS-67 10
n+10 OUT RW R 101 5 D Output Value + Status (specified in the GSD modules for Cyclic comms) Writeable only if MODE_BLK.ACTUAL = MAN
n+11 PV_SCALE RW A FLT 8 S Input Scale Expr.in PRIMARY_VALUE_UNIT (idx n+19)
n+12 OUT_SCALE RW R DS-36 11 S Output scale
n+13 LIN_TYPE RW S U8 1 S 0-Linear Not Used
n+14 CHANNEL RW S U16 2 S
AI_1 1 = Process Value (Press. Lev, Flow, Vol)
Fixed channel for AI_1 & AI_2
AI_2 2 = Static Pressure
AI_3
3 = Sensor temperature (default)
4 = Pressure
n+16 PV_FTIME RW S F LT 4 S 0….60 seconds Damping
n+17 FSAFE_TYPE RW S U8 1 S
0: Fsave Value as OUT
Default FSAFE_TYPE = 11: OUT = Last usable OUT value
2: OUT as calculated
n+18 FSAFE_VALUE RW S F LT 4 S Fail Safe Value Used only when FSAFE_TYPE = 0
n+19 ALARM_HYS RW S FLT 4 S Alarm Hysteresis [0.5%] Expr. as % of the OUT_SCALE range (idx n+12)
n+21 HI_HI_LIM RW S FLT 4 S Critical Limit High
Expressed in OUT_SCALE unit Index Iidx n+12)
n+23 HI_LIM RW S FLT 4 S Advisory Limit High
n+25 LO_LIM RW S F LT 4 S Advisory Limit Low
n+27 LO_LO_LIM RW S FLT 4 S Critical Limit Low
n+30 HI_HI_ALM R R DS-39 16 D Critical High Alarm
n+31 HI_ALM R R DS-39 16 D Advisory High Alarm
n+32 LO_ALM R R DS-39 16 D Advisory Low Alarm
n+33 LO_LO_ALM R R DS-39 16 D Critical Low Alarm
n+34 SIMULATE RW R DS-50 6 S AI input Simulation
n+35 OUT_UNIT_TEXT RW S O_STR 16 S Textual unit
VIEWS
n+134 VIEW_1 R 17 D
To Next Page
Loading...
