ABB 500NMD20 User Manual

Safety Instructions Introduction
2 Safety Instructions
2.1 Introduction
Read the following chapter before mounting and commissioning a system or device of the
EDS500 series.
2.2 Safety indication symbols
The following safety indication symbols are used in this documentation:
DANGER
Hazardous situation which, if not avoided, will result in death or serious injury of the
operating personnel. The provided information is necessary to know, if you configure a
EDS500 seriesdevice. The safety indication informs about a restriction etc.
WARNING
Hazardous situation which, if not avoided, could result in death or serious injury of
operating personnel.
CAUTION
Hazardous situation, which, if not avoided, could result in minor or moderate injury.
ADVICE
Important information not related to personal injury but that should be observed. This
symbol is used to indicate restrictions, prerequisites, and other information that is
important for configuration.
The following safety indication symbols are used on EDS500 series devices:
Symbol Type Level of danger
Warning Hazardous situation, read documentation (data sheets and
connection and settings documents)
Warning Laser, read documentation (data sheets and connection and
settings documents)
Table 2: Safety indication symbols on EDS500 series devices
1KGT150966 V0001 7

ABB 500NMD20 Specifications

General

Brand	ABB
Model	500NMD20
Category	Network Router
Language	English