Programming
ABB Control - AC 31 Page 5-3
1SBC 260400 R1001-b 06.99
●
●●
● An existing library with more than 150 functions:
The list of available functions depends on the chosen central unit. Once the central unit has
been defined the list is common for the different programming editors.
The 40 and 50 series have 60 functions split into the following:
- Binary functions
- Timer functions
- Counter functions
- Word comparison functions
- Word arithmetic functions
- Word logical functions
- Program control functions
- CS 31 bus configuration and acknowledgment functions
- Communication functions
- Control functions
- Format conversion functions
- Special functions
- Memory access functions
All the functions are comprehensively described in AC31GRAF online help as well as in the
documentation.
Refer to the "AC31GRAF User's guide" for software utilization.
To Next Page
Loading...
