ABB AC 31 - Page 138

Programming
ABB Control - AC 31 Page 5-29
1SBC 260400 R1001-b 06.99
● Standard display format
The channel type can also be set with the pushbutton.
The configuration mode is set when the push button is pressed for 10 seconds.
The display starts to blink and the current format is displayed (the factory setting is -/+10V)
Voltage configuration
The minimum displayed value is 0.01V
0-20 mA configuration
The minimum displayed value is 0.01mA
4-20 mA configuration
The minimum displayed value is 0.01mA
Pt100 configuration
The minimum displayed value is 0.1°C
Pt1000 configuration
The minimum displayed value is 0.1°C
Pt100 3 wires configuration
The minimum displayed value is 0.1°C
Pt1000 3 wires configuration
The minimum displayed value is 0.1°C
10V
0-20
4-20
100
1000
1.0.0.
1.0.0.0.