ABB ACH580-01 Series - Mechanical Installation - Frames R1 to R3; Unpacking and Examining the Delivery

EN – R0…R3 Quick installation guide 15
R0-
R3
R6-
R9
EN
DA
DE
ES
FI
FR
IT
NL
PL
PT
RU
SV
TR
ZH
 Disconnect EMC filter or ground-to-phase varistor, if needed
To disconnect the internal EMC filter or ground-to-phase varistor, if needed, do as
follows:
1. Switch off the power from the drive.
2. Open the front cover, if not already opened, see figure B on page 19.
3. To disconnect the internal EMC filter, slide the EMC switch in the direction shown
by the arrow.
4. To disconnect the ground-to-phase varistor, slide the varistor switch in the
direction shown by the arrow.
3
R0…R2
4
3
3
4
R3
3
4
4
3