52 EN – Quick installation and start-up guide
Change the units shown on the panel if needed.
• Go to the edit view of a selected row by
pressing .
• Scroll the view with and .
Go to the next view by pressing (Next).
To select a value in an edit view:
• Use and to select the value.
Press (Save) to accept the new setting, or
press (Cancel) to go back to the previous
view without making changes.
Set the date and time as well as date and time
display formats.
• Go to the edit view of a selected row by
pressing .
• Scroll the view with and .
Go to the next view by pressing (Next).
To give the drive a name that will be shown at the
top, press .
If you do not want to change the default name
(ACH580), continue by pressing (Next).
For information on editing text, see ACH580
firmware manual (3AXD50000027537 [English]).
The first start is now complete and the drive is
ready for use.
Press (Done) to enter the Home view.
To Next Page
Loading...
