3. Attach the chains to the lifting holes of the flange and lift the drive with a lifting
device onto the opening in the mounting plate.
4. Attach the bottom bracket with one screw.
5. Attach the top bracket with one screw.
6. Attach the rest of the mounting screws. Remove the chains.
5«5
î0î
1āP (4.4 lbf·ft)
5
î0î
1āP (4.4 lbf·ft)
î0î
1āP (4.4 lbf·ft)
î0î
1āP (4.4 lbf·ft)
Mechanical installation – Frames R6 to R9 53
To Next Page
Loading...
