Applicable standards
InformationStandardMC
European electrical safety requirements product standards
Adjustable speed electrical power drive systems. Part 5-1: Safety
requirements – electrical, thermal and energy
IEC/EN 61800-5-1:2007××
Semiconductor converters – General requirements and line com-
mutated converters – Part 1-1: Specification of basic requirements
IEC 60146-1-1:2009
EN 60146-1-1:2010
××
Insulation coordination for equipment within low-voltage systems.
Part 1: Principles, requirements and tests
IEC/EN 60664-1:2007××
Degrees of protection provided by enclosures (IP code).IEC 60529:1989×
EN 60529:1991[TS1]
Safety of machinery. Electrical equipment of machines. Part 1:
General requirements.
IEC 60204-1:2005 +A1:2008
EN 60204-1:2006 +AC:2010
×
Low-voltage switchgear and control gear assemblies - Part 1:
General rules
IEC/EN 61439-1:2009×
EMC performance
Adjustable speed electrical power drive systems. Part 3: EMC re-
quirements and specific test methods
IEC/EN 61800-3:2004+A1:2012×
Product requirements in North America
Power Conversion EquipmentUL 508C 3rd edition: 2002×
Industrial Control Panels[TS3]
UL 508A 1st edition:2001×
Insulation Coordination Including Clearances and Creepage Dis-
tances for Electrical Equipment
UL 840 3rd edition:2005×
Enclosures for Electrical Equipment, Non-Environmental Consid-
erations[TS4]
UL 50 12th edition:2007
×
Adjustable speed electrical power drive systemsUL 61800-5-1 1st×
edition:2012
Industrial control equipmentC22.2 No. 14-13:2013××
Adjustable speed drivesC22.2 No. 274-13:2013××
Cabinet-installed multidrivesC
Multidrives modulesM
42 Standards and markings
To Next Page
Loading...
