ABB ACS880-11 - Page 287

Parameters 287
33.22 On-time 2 function Configures on-time timer 2. 0000b
0000b…0011b On-time timer 2 configuration word. 1 = 1
33.23 On-time 2 source Selects the signal to be monitored by on-time timer 2. False
False Constant 0 (timer disabled). 0
True Constant 1. 1
RO1 Bit 0 of 10.21 RO status (page 151). 2
Other [bit] Source selection (see Terms and abbreviations on page 114). -
33.24 On-time 2 warn
message
Selects the optional warning message for on-time timer 2. On-time 2
exceeded
On-time 2
exceeded
A887 On-time 2. The message text can be edited on the
control panel by choosing Menu – Settings – Edit texts.
1
Clean device A88C Device clean.6
Maintain additional
cool fan
A890 Additional cooling.7
Maintain cabinet
fan
A88E Cabinet fan.8
Maintain DC
capacitors
A88D DC capacitor.9
Maintain motor
bearing
A880 Motor bearing.10
33.30 Edge counter 1
actual
Actual present value of signal edge counter 1.
The counter is incremented every time the signal selected by
parameter 33.33 Edge counter 1 source switches on or off (or
either, depending on the setting of 33.32 Edge counter 1
function). A divisor may be applied to the count (see 33.34
Edge counter 1 divider).
When the counter exceeds the limit set by 33.31 Edge counter
1 warn limit, bit 2 of 33.01 Counter status is set to 1. The
warning specified by 33.35 Edge counter 1 warn message is
also given if enabled by 33.32 Edge counter 1 function
.
The counter can be reset from the Drive composer PC tool, or
from the control panel by keeping Reset depressed for over 3
seconds.
-
0…4294967295 Actual present value of signal edge counter 1. -
No. Name/Value Description Def/FbEq16
Bit Function
0 Counter mode
0 = Loop: When the limit is reached, the counter is reset. The counter status (bit 1 of
33.01) switches to 1 for one second. The warning (if enabled) stays active for at least 10
seconds.
1 = Saturate: When the limit is reached, the counter status (bit 1 of 33.01) switches to 1,
and remains so until 33.20 is reset. The warning (if enabled) also stays active until 33.20
is reset.
1 Warning enable
0 = Disable: No warning is given when the limit is reached
1 = Enable: A warning (see 33.24) is given when the limit is reached
2…15 Reserved