ABB ACS880-11 - Planning the Use of Cubicle Heaters; Planning Cabling Outside the Cabinet; Installing ABB Common Mode Filters (Option +E208)

Guidelines for planning the cabinet installation 37
Planning the use of cubicle heaters
Use a cubicle heater if there is a risk of condensation in the cabinet. Although the
primary function of the heater is to keep the air dry, it may also be required for heating
at low temperatures.
Planning cabling outside the cabinet
See section Routing the cables in the hardware manual.
Installing ABB common mode filters (option +E208)
Common mode filter kits are available from ABB. For ACS880-01 drive modules,
without the cable entry box, hang the common mode filter ring on the cabinet
structure. For the dimensions of the ring and routing of the motor cable through the
ring, see
Common mode filter kit for ACS880-01 drives (frame R6, option
+E208) installation guide
3AXD50000015178
Common mode filter kit for ACS880-01 drives (frame R8, option
+E208) installation guide
3AXD50000015180
Common mode filter kit for ACS880-01 drives (frame R9, option
+E208) installation guide
3AXD50000015201
Common mode filter kit for frames R7 and R8 (option +E208)
installation guide
3AXD50000015179