Electrical installation 47
Electrical installation
What this chapter contains
This chapter tells you how to install the power and control cables to the drive module.
For other electrical installation instructions that concern the drive, see the hardware
manual.
Warnings
WARNING! Only qualified electricians are allowed to carry out the work
described in this chapter. Obey the safety instructions given in chapter Safety
instructions. If you ignore them, injury or death or damage to the equipment can
occur.
Connecting the motor cable at the motor end
Connect the motor cable at the motor end.
For minimum radio frequency interference, ground the motor cable shield 360
degrees at the motor terminal box.
To Next Page
Loading...
