17
Electromagnetic Flowmeter
COPA-XE / MAG-XE
Submenu/Parameter Entry Type Comments
from table
Exit the submenu
Standard/Fast
Standard: continuous flow rate metering
Fast: accelerated signal processing (short time batch operation or
pulsating flows)
Selection of the flow direction forward/reverse or forward only.
Normal/Inverse
Reverse the flow direction indicators
Normal = forward, inverse = reverse
from table
When a converter is exchanged all the data are automatically
uploaded from the external EEPROM when the power is turned
on. A command to store all the data in the external EEPROM is
also available.
from table After start-up the parameter settings should be stored in the
external EEPROM.
Display of the software version being used.
03/99 = Date of the release
B.10 = Revision level
An alphanumeric TAG-number with up to 16 characters, including
upper and lower case letters, can be entered to identify the meter
location.
For HART-Protocol the TAG-Number is limited to 8 characters.
Any lower case letters are also automatically converted to upper
case letters.
numeric Only for ABB Automation Products.
C/CE
ENTER
Operating Mode
Standard
Flow Direction
Forward/Reverse
Direction Indic.
normal
Load data from
Ext. EEPROM
Model Number 03/99
Part Number B.10
To Next Page
Loading...
