Set ANNUAL PERIOD
Enables a defined period to be set, in which the program set up previously must
be executed.
The period defined in the annual program is repeated cyclically every year.
Set the start and end of the period in the format 1. dd/
mm/-- using keys
.
Press 2. OK to confirm every field.
The annual period is set. »
Press3. MENU to exit programming.
2-4 Check a program
Access desired program menus (STANDARD P, CYCLIC P...) by pressing MENU.
Select the program type from the menu (e.g. RAN-1.
DOM P) using keys
.
Press 2. OK to confirm.
The programs of the same type in the memory »
are displayed.
Select the program to be checked using keys 3.
.
The display shows the settings cyclically. »
2-5 Modify a program
Press 1. OK to confirm program to be modified.
Set new values as described in subsection 2-3.2.
i
To Next Page
Loading...
Need help?
General
