ABB DCT880 - Electronic Tray Removal for Fuse Access (T1-T4); Remove grounding;holding screws for tray; Unhinge and remove electronic tray with SDCS-CON-H

58
4. Remove the grounding / holding screws at
the electronic tray.
5. To unhinge the electronic tray including
the SDCS-CON-H pull it up and then out.
6. Before removing the tray completely
unplug the flat cables (X14, XC12, XS13)
and the cable connected to X38.
Service
3ADW000449R0101 DCT880 Service Manual e a