ABB DPA UPScale ST60 - Packing & Transportation; Standard Package (Film)

Modifications reserved
Page 21/79
4.1 Packing & transportation
Usage policy of ABB packing solutions for the UPS:
Transport type
Standard package
(Film)
Sea freight light
package
(Cardboard box)
Sea freight cases
(wooden box)
Sea freight
DO NOT USE
1 )
MANDATORY Optional
Air freight
Standard Optional Optional
Transportation on
well-developed
roads without
transshipment
Standard Optional Optional
Transportation on
well-developed
roads with
transshipment
DO NOT USE
1)
MANDATORY Optional
Transportation on
rough roads or
trains
DO NOT USE
1)
DO NOT USE
1)
MANDATORY
1)
If inappropriate packaging is the cause of damages, ABB reserves the right to cancel the warranty.
The UPS and accessories are delivered on a specially designed pallet that is easy to move with a
forklift or a pallet jack. Always keep the UPS in an upright position and do not drop the equipment. Do
not stack the pallets (because of the high-energy batteries involved and their heavy weight.)
Before transporting, check surface loading
capability and use
an adequate forklift to move
the equipment to the final position.
For specific weights, refer to the technical data
sheet.
HEAVY!
BEWARE: THE UNIT IS VERY
HEAVY.
Fig 4.1-1: Forklift for transportation