Commissioning and service field (ISF)
32 OI/PME/LME/EAN823/EBN853/EBN861-EN
6.2 Positions for the potential switch
The potential switch connects the reference potential either to the system or the protective
ground (see page 28 Fig. 20 item 8).
Name:
INT
Position A:
SYS
Position B:
Settings:
Conventional control via analog setpoint without external electrical
isolation:
SYS
Conventional control via analog setpoint with external electrical
isolation:
Step controller control:
Bus communication:
To Next Page
Loading...
