Alarms / Errors
36 OI/PME/LME/EAN823/EBN853/EBN861-EN
7.3 Error diagram
Positioning time-out Hardware
monitoring
Software monitoring
- Standstill
- Min. speed
- Movement in incorrect
direction
Frequency converter
end positions
Position sensor memory error Flash
error
RAM error
Watchdog monitoring activated
Monitoring ON
&
Error signal
Error message via
actual value ON
&
Saved errors (reset option)
Analog output
1 to 3.5 mA with "Low alarm"
21.5 to 25 mA with "High alarm"
Error display ON
To Next Page
Loading...
