ABB HiPerGuard MV UPS - Installation, Layout, and Interface Options

MODEL DEFINITION
HIPERGUARD MV UPS
USER MANUAL
42
/
103
4.10. Installation
Installation Code
Indoor 0
Outdoor 1
Table 4.3: HiPerGuard MV UPS installation options order code
4.11. Layout
This field refers to the physical arrangement of the PCU (low voltage enclosures). The letter “B”
corresponds to “back-to-back” arrangement.
4.12. Power Exchanger interface
The HiPerGuard MV UPS can provide a Power Exchanger (PE) interface for an external demand response
controller (DRC). The demand response interface allows the customer to manage changes in
supply/demand for electrical power.
Demand Response Interface Code
Disabled 0
Enabled 1
Table 4.4: HiPerGuard MV UPS order code for Power Exchanger interface function
4.13. Standby generator
The HiPerGuard MV UPS can be connected to different types of backup generators installed up-stream.
The following options define the type of generator.
Upstream Generator Code
None 0
Yes 1
Table 4.5: HiPerGuard MV UPS upstream generator options order code
4.14. Standard
This field refers to IEC or UL standard. If UL is required contact the factory.