Need help?Do you have a question about the ABB HiPerGuard MV UPS and is the answer not in the manual?
Details on document identification, copyright, and contact information for ABB.
General information regarding the HiPerGuard MV UPS product covered by the manual.
Required skills and expertise for handling, installation, operation, and maintenance.
User obligations for safe operation, intended equipment use, and unauthorized modifications.
Applicable standards, conformity declarations, and items included in the delivery.
Definitions of abbreviations and terms used in the manual.
Lists registered trademarks used in the manual.
Lists related documents available for additional information.
Welcomes the user and outlines the manual's purpose and scope.
Important warnings and safety instructions for operating the HiPerGuard MV UPS.
General guidelines and operator duties for safe operation and maintenance.
Identifies potential hazards and risks associated with the HiPerGuard system.
Information on network interface and customer responsibilities for security.
Recommendations for secure deployment and use of the HiPerGuard MV UPS.
Introduction to the UPS system, its architecture, and a visual representation.
Explains Power Conditioning and Independent modes of operation.
Describes transitions between Power Conditioning and Independent modes.
How the UPS interfaces with generators and demand response controllers.
Introduces the main components of the HiPerGuard MV UPS system.
Details PE120 enclosures, their contents, and the Graphical Display Module.
Describes APS enclosure, auxiliary charger, and MVM enclosure.
Details DCT enclosure and the overall cooling system.
Outlines the structure and meaning of the product order code.
Specifies options for voltage, cable entry, energy storage, and system configuration.
Options for installation, physical arrangement, and interface features.
Key data including rated voltage, power, efficiency, and utility input parameters.
Specifications for load output, overload ratings, and energy storage details.
Specifications for MV switchgear and environmental operating parameters.
Details interface capabilities and physical dimensions of the UPS.
General overview of connections and medium voltage AC power connections.
Details DC storage connections and APS power/I/O interfaces.
Covers digital signals, auxiliary power, and Emergency Power Off functionality.
Describes interfaces for BMS, Modbus TCP, generators, and Power Exchanger.
Describes optical link for data exchange with the switchgear.
Accessing Modbus TCP and web interfaces via the internet coupler.
Setup for communications network between MV UPS units in parallel configuration.
Primary interface for configuration, control, and status monitoring.
Explains GDM icons, themes, main screen, and system view.
Displays active events, warnings, faults, and power quality events.
Access to parameters, settings, and user login levels.
Safety precautions and illustration of UPS machine states.
Procedures for starting the system and precharging the DC bus.
Describes System Bypass, Independent Mode, Resynchronization, and Stopping.
System reactions to hard faults and energy storage depletion.
Recommended intervals for maintenance and component replacement.
To Next Page
General